Evaluación paramétrica del desempeño de conexiones empernadas madera–acero-madera en configuración de doble cortante según el Eurocódigo 5

Luis Enrique Chávez Rubio, Verónica Carolina Obando Navas, Richard Esteban Sarzosa Soto, Mauricio Rodrigo Llerena Tamayo

Resumen


El presente estudio realiza un análisis comparativo del comportamiento estructural de conexiones empernadas madera-acero en configuración de doble cortante, evaluadas conforme a los lineamientos del Eurocódigo 5 (EN 1995-1-1:2022). Se aplicó un diseño experimental factorial y un análisis paramétrico mediante hojas de cálculo programadas, considerando las variables más influyentes en la capacidad portante: tipo de conector, clase resistente de la madera, clase de servicio, ángulo de carga, espesor de la placa de acero y número de pernos. Los resultados demuestran que los pernos de diámetros intermedios (M7–M10) alcanzan el mejor equilibrio entre eficiencia estructural y constructiva. Las condiciones ambientales adversas (clase de servicio 3) y la orientación diagonal de la carga (45°) generan reducciones superiores al 75% en la capacidad portante. Este estudio ofrece lineamientos técnicos para el diseño optimizado de conexiones híbridas madera-acero con base en principios normativos y comportamiento estructural real.


Palabras clave


conexiones empernadas madera-acero; Eurocódigo 5; capacidad de conexión; análisis paramétrico; diseño estructural híbrido.

Texto completo:

PDF HTML

Referencias


Ataei, A., Chiniforush, A. A., Bradford, M., & Valipour, H. (2019). Cyclic behaviour of bolt and screw shear connectors in steel-timber composite (STC) beams. Journal of Constructional Steel Research, 161, 328–340. https://doi.org/10.1016/J.JCSR.2019.05.048

Dias, A. M. P. G., Cruz, H. M. P., Lopes, S. M. R., & van de Kuilen, J. W. (2010). Stiffness of dowel-type fasteners in timber-concrete joints. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 163(4), 257–266. https://doi.org/10.1680/STBU.2010.163.4.257

Dobes, P., Lokaj, A., & Mikolasek, D. (2022). Load-Carrying Capacity of Double-Shear Bolted Connections with Slotted-In Steel Plates in Squared and Round Timber Based on the Experimental Testing, European Yield Model, and Linear Elastic Fracture Mechanics. Materials 2022, Vol. 15, Page 2720, 15(8), 2720. https://doi.org/10.3390/MA15082720

European Committee for Standardization. (2022). Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (EN 1995-1-1:2022). .

Jockwer, R., Caprio, D., & Jorissen, A. (2022). Evaluation of parameters influencing the load-deformation behaviour of connections with laterally loaded dowel-type fasteners. Wood Material Science and Engineering, 17(1), 6–19. https://doi.org/10.1080/17480272.2021.1955297;REQUESTEDJOURNAL:JOURNAL:SWOO20;WGROUP:STRING:PUBLICATION

Jurkiewiez, B., Durif, S., Bouchair, A., & Grazide, C. (2022). Experimental and analytical study of hybrid steel-timber beams in bending. Structures, 39, 1231–1248. https://doi.org/10.1016/J.ISTRUC.2022.03.055

Lachowicz, M. B., & Lachowicz, M. M. (2021). Influence of Corrosion on Fatigue of the Fastening Bolts. Materials, 14(6), 1485. https://doi.org/10.3390/MA14061485

Li, Y., Wang, Y., Zhong, Y., Wei, W., Su, H., & Gao, T. (2024). Finite Element Modeling of Beam-to-Column Steel Timber Composite Joints with Different Parameters. Buildings, 14(9), 2858. https://doi.org/10.3390/BUILDINGS14092858

Li, Z., Feng, W., Ou, J., Liang, F., & He, M. (2021). Experimental investigations into the mechanical performance of glulam dowel-type connections with either bolts or screws as fasteners. Journal of Wood Science, 67(1), 1–11. https://doi.org/10.1186/S10086-021-02002-5/FIGURES/11

Loss, C., & Davison, B. (2017). Innovative composite steel-timber floors with prefabricated modular components. Engineering Structures, 132, 695–713. https://doi.org/10.1016/J.ENGSTRUCT.2016.11.062

Ottenhaus, L. M., Jockwer, R., van Drimmelen, D., & Crews, K. (2021). Designing timber connections for ductility – A review and discussion. Construction and Building Materials, 304. https://doi.org/10.1016/J.CONBUILDMAT.2021.124621

Poletti, E., Vasconcelos, G., Branco, J. M., & Isopescu, B. (2019). Effects of extreme environmental exposure conditions on the mechanical behaviour of traditional carpentry joints. Construction and Building Materials, 213, 61–78. https://doi.org/10.1016/J.CONBUILDMAT.2019.04.030

Pyykkö, J., & Svensson, S. (2024). Load-bearing capacity of slender dowel-type fasteners in Timber-Concrete Composite connections. Engineering Structures, 316, 118556. https://doi.org/10.1016/J.ENGSTRUCT.2024.118556

Qian, Y., Gunawardena, T., Mendis, P., & Aye, L. (2025). Carbon Footprint Variability in Engineered Wood Products for Timber Buildings: A Systematic Review of Carbon Accounting Methodologies. Sustainability (Switzerland), 17(11), 4804. https://doi.org/10.3390/SU17114804/S1

Quenneville, J. H. P., & Mohammad, M. (2000). On the failure modes and strength of steel-wood-steel bolted timber connections loaded parallel-to-grain. Canadian Journal of Civil Engineering, 27(4), 761–773. https://doi.org/10.1139/CJCE-27-4-761

Sawata, K. (2015). Strength of bolted timber joints subjected to lateral force. Journal of Wood Science, 61(3), 221–229. https://doi.org/10.1007/S10086-015-1469-8/FIGURES/5

Tsalkatidis, T., Amara, Y., Embaye, S., & Nathan, E. (2018). Numerical investigation of bolted hybrid steel-timber connections. Frontiers in Built Environment, 4, 411855. https://doi.org/10.3389/FBUIL.2018.00048/BIBTEX

Tupenaite, L., Kanapeckiene, L., Naimaviciene, J., Kaklauskas, A., & Gecys, T. (2023). Timber Construction as a Solution to Climate Change: A Systematic Literature Review. Buildings 2023, Vol. 13, Page 976, 13(4), 976. https://doi.org/10.3390/BUILDINGS13040976

Wang, X. T., Zhu, E. C., Niu, S., & Wang, H. J. (2021a). Analysis and test of stiffness of bolted connections in timber structures. Construction and Building Materials, 303. https://doi.org/10.1016/J.CONBUILDMAT.2021.124495

Wang, X. T., Zhu, E. C., Niu, S., & Wang, H. J. (2021b). Analysis and test of stiffness of bolted connections in timber structures. Construction and Building Materials, 303. https://doi.org/10.1016/J.CONBUILDMAT.2021.124495

Zelinka, S. L., Sichel, R. J., & Stone, D. S. (2010). Exposure testing of fasteners in preservative treated wood: Gravimetric corrosion rates and corrosion product analyses. Corrosion Science, 52(12), 3943–3948. https://doi.org/10.1016/J.CORSCI.2010.08.014




DOI: https://doi.org/10.23857/pc.v10i7.9885

Enlaces de Referencia

  • Por el momento, no existen enlaces de referencia
';





Polo del Conocimiento              

Revista Científico-Académica Multidisciplinaria

ISSN: 2550-682X

Casa Editora del Polo                                                 

Manta - Ecuador       

Dirección: Ciudadela El Palmar, II Etapa,  Manta - Manabí - Ecuador.

Código Postal: 130801

Teléfonos: 056051775/0991871420

Email: polodelconocimientorevista@gmail.com / director@polodelconocimiento.com

URL: https://www.polodelconocimiento.com/